LAST UPDATED October 26, 2017
GSXR 600 750 1000 SWINGARM EXTENSIONS
KAWASAKI
ZX6R ZX7R ZX9R ZX10R ZX12R ZX14R SWINGARM EXTENSIONS
GSXR 600 750 1000 CHROME SWINGARM EXTENSIONS $225
ZX14R BLACK CONTRAST CUT SWINGARM EXTENSIONS ADJUST 3-9 INCHS  $155
ZX10R BLACK CONTRAST CUYT SWINGARM EXTENSIONS ADJUST 3-9 INCHS  $165
ZX12R BLACK CONTRAST CUT SWINGARM EXTENSIONS ADJUST 3-9 INCHS $155
(8) GSXR 1000 07-08 ONLY PACKAGE (8) $390
(10) GSXR 600-750 06-09 ONLY SWINGARM EXTENSION PACKAGE $390
   ALL THINGS CHROME
            615-431-2294

SWING ARM EXTENIONS

MADE IN THE *USA*
BILLET T6061 BILLET ALUMINUM 
1999-2007 HAYABUSA
CHROME SWIMGARM
EXTENSIONS  3 -9 INCHES OVER STOCK
$245
(SHIPPING INSIDE THE USA INCLUDED)


2008-2017 HAYABUSA
CHROME SWIMGARM
EXTENSIONS 3-9 INCHES OVER STOCK
 $245
(SHIPPING INSIDE THE USA INCLUDED)

1999-2007 HAYABUSA
RAW EXTENSIONS
11-16 INCHES OVER STOCK

Swing arm Extensions Install

1.The parts you will need to complete the installation:

2.Lift the motorcycle in a suitable fashion with the rear wheel off the ground:

3.Remove the rear wheel assembly and attaching parts:

4.Remove chain adjuster bolts from both sides of the swing arm:

5.Remove screw and plate from the inner left side of the swing arm:

6.Install swing arm extensions into the existing swing arm:

7.Install extension backing plate, apply red Loctite to bolt threads and torque to 25 ft. lbs:

8.Swing arm extensions installed:

9.Notice the machined recess on the inside of the right side swin garm extension. This is where the brake hanger will now be located depending on application:

10.Brake hanger in new location:

11.Re-install the rear wheel assembly, brake hanger and brake caliper:

12.Inspect the clearance between the sidewall of the rear tire and the chain guard. The chain guard may need to be trimmed to provide proper clearance depending on application.

13.Remove master link from old chain:

14.With master link removed, temporarily attach new chain to the upper portion of the old chain. You may use the new master link to do this:

15.Pull on the lower portion of the old chain to feed new chain around the front sprocket. This will make the installation of the new chain much easier:

16.Finish installing new chain and adjust as necessary:

17.Install new rear brake line provided and bleed the rear brake:

18.The installation of the ALL THINGS CHROME extensions is now complete. Perform a final re-check of all nuts, bolts and installed components. Torque rear axle nut to factory specs. Road test and re-check drive chain for any excessive slack. Adjust as necessary: